Aurum Cantus Grand Harmony 2
Listed · 249 Views
Time Left: 19 Days
Ending: 05/17 at 09:30 PM ET
New Retail Price:$13,500.00
$3,500.00
Condition | |
Payment methods | |
Ships from | Jamaica, NY, 11435 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carrier | Local pickup only |
Shipping cost | N/A |
Original accessories | Box |
Average | Research Pricing |
I have for sale a mint pair of the Aurum Cantus Grand Harmony Speakers . This are in the hard to find Sapele Pommele PE High Gloss Finish . These pair has been used in a child/pet/dust free home . They have less than 200 hours of use. There are no marks or blemishes on the speakers. The look as good as new. I take extremely great care of all my audio equipment .
They were purchased directly from Audiophile Direct around 4 years ago and I have the original boxes and material but I will not shipped these heavy speakers because Fed Ex or UPS will not handle them with care and as always they will arrived broken even when they are packed exactly how they came from the factory. Even If the buyer wants to pay for the shipping I will not do it. They will have to be picked up here in Queens ,NY. Reason for selling is due to moving in the next few months.
Buyer will be responsible for PayPal fees if using Paypal).
Carlos
The Grand Harmony is a truly landmark product for Aurum Cantus. Begun as a project to revise and upgrade the original version of the Harmony, the engineering team was set free and began with a totally clean slate. Allowed to run amok, the design team spend quite a bit of time targeting the performance and price point for this new speaker. The result is a stunning fruition of their efforts. This 4.5-way, six component system combines the 20+ year experience at Aurum Cantus in engineering individual components and complete systems. In addition to the pure aluminum ribbon tweeter /mid-range and ribbon super tweeter, the system incorporates a 6.5" mid-woofer and 2 x 8" woofers, both incorporating non-woven carbon fiber and Kevlar construction with a specialized nano-meter aero-metal plating. To improve the front to rear imaging of the system, a rear firing pure aluminum ribbon tweeter is included. With an emphasis on detail, resolution, dynamic range and tonal balance, the Aurum Cantus team has designed a benchmark product at this price point. We honestly don't know of another speaker that can compete in this category at this price. As with all the V Series Floor Standing speakers, 4 x 18mm gold-plated copper core connectors allow for single or bi-wiring. Supplied with large adjustable spike feet and protective carpet cups. The Grand Harmony is best suited for moderately large to large listening environments and requires at least two capable persons for unpacking and set-up. Available in high gloss Cherry, Figured Maple, Rosewood or Sapele Pommele.
Technical data:
- Design: 4.5-way vented-box
- Frequency Response: 30Hz-40KHz
- Sensitivity (2.83V/1m): 88dB
- Impedance: 4 ohms(minimum 3.2 ohms)
- Power Requirement: 50-350W recommended
- Tweeter - 1: Model Purified aluminum, (LWT): 60mm × 8.5mm × 0.01mm. High power handling, high output with shielded design and field-replaceable diaphragm.
- Tweeter - 2: Model AST2560 Aero Striction Tweeter, (W/L): 25mm ×60mm, with field replaceable diaphragm.
- Tweeter-3 (Rear Firing Tweeter): Model Purified aluminum ribbon (LWT): 60mm × 8.5mm × 0.01mm. High power handling, high output with shielded design and field-replaceable diaphragm.
- Midrange: Model AC165/DC50SCTi-2, 1×165mm (6.5″). Aluminum frame, carbon fiber sandwich cone with nano-meter aero-metal material plating, 50mm (2″) copper clad aluminum voice coil with flat wire, utilizing a magnet system with Faraday ring and demodulation coil, 120mm × 20mm and 80mm × 15mm Y30 Ferrite magnet.
- Woofer: Model AC200/50C2CTi, 2×200mm (8″). Aluminum frame, carbon fiber sandwich cone with nano-meter aero metal material coating, 50mm (2″) copper clad aluminum voice coil with flat wire utilizing a special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
- Crossover Frequency: 200Hz, 1.8kHz, 7kHz and 9kHz.
- Crossover’s Attenuation Slope: Woofer -12dB,Midwoofer -12dB,Tweeter:T1 -12dB, T2 -12dB, T3( rear firing tweeter) -12dB.
- Crossover Components: M-cap MKP capacitors are used for the tweeter and midrange, with Aurum Cantus MKP capacitors used for the woofer. Non-polarized electrolytic capacitors are used for emendation circuit of the woofer with highly purified OFC inductors and military grade metal oxide film resistors.
- Connective Cable: Teflon insulated OCC cable
- Damping Material: High quality wool, polyester fiber and PU foam.
- Connections: 4 x 18mm gold-plated copper connector w/ Bi-wiring
- Cabinet Material: High quality MDF
- Finish: Sapele Pommele PE high gloss, Rosewood PE high gloss, Figured Maple PE high gloss and Cherry PE high gloss.
- Dimensions (HWD): 1190mm × 357mm × 492mm (46.85″×14.06″×19.37″).
- Net Weight: 61kgs/ea. (134.47lb/ea.)
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.
Listings Similar to Aurum Cantus
11 Watchers
Items from this seller
- Marantz SC-11S1 Preamplfier
Current Price: $1,450.00
- Aurum Cantus Grand Harmony 2
Current Price: $3,500.00
- ToneWinner AD1-PA
Current Price: $2,000.00
more from this seller →