*** EXPRESSIMOAUDIO *** ((( TONEARM LIFT )))

*** EXPRESSIMOAUDIO *** ((( TONEARM LIFT )))

Polished to a GOLD LUSTER

Free shipping in lower 48 ONLY
Over Seas buyer must email me for shipping Quote

If you don't have one you MUST!!!
If you ever got up out of the Sweet Spot or just fell asleep.
Or enjoy Dinner party's and listen to MUSIC while eating or just FORGET .
This is a PRODUCT for YOU.
It will SAVE your Cartridge ( Stylus ).
The LAST GROOVE is NOT a GOOD Place for your Stylus !!

Stereophile Magazine, Mike Fremer:
"Every Turntable should have ONE! BEST COMPONENT 12 Times !!!!"

Instructions for THE LIFT

When you receive THE LIFT it will come with a SMALL Allen Wrench and Small Velcro strip.

THE LIFT is made for Platters 1" to 1" 1/2 Tall
But you can see with a simple Spacer you can put it on any platter.
What you will need, is a small piece of Double sided tape to hold down THE LIFT to the Plinth.

The center point of THE LIFT is just ABOVE ( 1/16 to 1/8 ) the top of the Vinyl.
You can adjust that by unloosening the set screw and moving the Foot Stand up or down.
This will be how HIGH it lifts your arm.

Please use the CARTRIDGE GUARD and OLD VINYL when setting up THE LIFT.
Simple to do.

Adjusting the HEAD of THE LIFT for Counter Weight.
Some Cartridges weigh 6 to 12 grams + . So you will need to Adjust the Head Weight of THE LIFT Accordingly.

You Set the arm at the last groove and position THE LIFT touching the arm.
Please look at the pictures.