Conrad-Johnson LP125sa+ Vacuum-Tube Stereo Power Amplifier NIB

For those looking to move up to a near reference quality vacuum tube system from Conrad-Johnson, look no further.

Amazing sounding and quality parts only in this one of a kind Conrad-Johson Tube {power amp. The LP125sa+Stereo Amplifier is the latest in the highly regarded series of conrad-johnson vacuum-tube power amplifiers. The LP125sa+ offers a compelling combination of the audio excellence one expects from conrad-johnson, the convenience of a single stereo chassis, and, at 125 watts per channel, sufficient power for the majority of high-end speaker systems. Capable of capturing the delicate textures and subtle nuances of live music while maintaining control with the authority that comes with ample power.

The audio circuit consists of three stages. The input signal is amplified by a single-ended triode amplifier designed for wide bandwidth. The signal is then direct coupled to a cathode coupled phase-inverter. This high current, triode phase-inverter stage provides a balanced, low impedance drive to the output stage. Output power is developed by KT120 power tubes (two pairs per channel in the LP125sa), chosen for their excellent sonic character, high power capability, and reliability. The output tubes are operated in ultralinear configuration which offers a desirable combination of high power and low distortion. Massive output transformers with intricately interleaved windings afford extended bandpass and high phase linearity. A small amount (about 12 dB) of loop negative feedback reduces distortion and achieves a sufficiently high damping factor to control reactive loudspeaker systems.

Power supply design is every bit as critical to the performance of an audio component as the audio circuit itself. Separate, low impedance, discrete dc power supply regulators are provided for the input and phase-inverter stages, preventing the output stage from modulating these stages through the power supply.

This amplifier requirse no complicated adjustments or specialized equipment to maintain. To assure continued peak performance, the owner need only make a simple bias adjustment when new tubes are installed. Built in LED bias indicators allow the user to make this adjustment using only the supplied bias adjustment tool.

As expected for conrad-johnson products, the LP125sa+ set uncommonly high quality standards. Even the gold plated connectors and the internal wiring have been carefully selected for optimal sonic performance. These amplifiers offer tube performance that "just sounds right". The upgraded LP125sa+ incorporates CJD Teflon Capacitors and ultra high-performance metal foil resistors in strategic applications in the circuit. Any of these models is sure to rekindle your passion for enjoying great music in your home.

Specifications:

Power:
LP125sa - 125 Watts per channel from 30 Hz to 15 KHz at no more than 1.5 % THD or IMD, both channels driven into 4 ohms (also available connected for 8 or 16 ohm loads)

Sensitivity:
LP125sa - 1.1 Volt rms to rated power

Frequency Response (at 10 watts):20 Hz to 20 kHz, +/- .1 dB
Hum and Noise: 104 dB below rated power
Input Impedance: 100 kOhms
Tube Complement:
LP125sa - 1 6189, 2 6N30P, 8 KT120

Dimensions: 19D x 19W x 7.1H inches
Weight:
LP125sa - 82 lb