Conrad Johnson LP125m Mint Mono Amps with Extras

Stereophile class A component.

Mint condition LP125M mono amplifiers. Less than 1 year old in pristine condition. I will include KT120 or 6550 SED tubes, your choice. Tubes are very low hours. Additionally the fuses were replaced with premium HIFI tuning fuses.

The condition of both amps is absolutely perfect! Ships with everything original from the manufacturer including tube cages and boxes which are also in mint condition.

As always I do not charge PayPal. Shipping specified after sale

Specifications & Power:

LP125M - 125 watts from 30 Hz to 15 KHz at no more than 1.5 % THD when driven into 4 ohms (also available connected for 8 or 16 ohm loads)
Sensitivity:

LP125M - 0.9V to rated power
Frequency Response: (at 10 watts): 20 Hz to 20 kHz, +/- .25 dB
Hum and Noise: 102 dB below rated power
Input Impedance: 100 kOhms
Tube Complement:
LP125M - 1 x M8080, 1 x 6922, 4 x 6550
Dimensions: 16D x 19W x 6.38H inches
Weight:
LP125M - 47 lbs.

Manufacture Description:

Consistent with conrad-johnson's design philosophy that circuits should be kept as simple as possible, these amplifiers work their magic with a minimum of vacuum tubes (seven in the stereo LP66S, and six in the mono LP125M). A composite triode input stage is direct coupled to a cathode-coupled phase inverter. The output stage is comprised of 6550s operated in ultralinear configuration (one pair per channel for the LP66S, two pair for the LP125M) for an optimal combination of high power and low distortion. Limited negative feedback is applied to the circuit to reduce distortion and provide a sufficiently high damping factor to control most real-world speaker systems. Discrete dc power supply regulators are provided for the input and inverter stages, in order to isolate each stage from the output signal.

As with all conrad-johnson tube amplifiers, these amplifiers require no complicated adjustments or specialized equipment to maintain. To assure continued peak performance, the owner need only make a simple bias adjustment when new tubes are installed. Built in LED bias indicators allow the user to make this adjustment using only the supplied screwdriver.

Component parts quality is a signature strength of any conrad-johnson product. The audio circuit and related power supplies feature precision metal film resistors and high-performance polypropylene capacitors. There are no electrolytic capacitors in the audio circuit or in the related power supplies. Proprietary wide-bandwidth output transformers contribute to excellent high frequency performance. Even the input/output connectors and internal wiring have been carefully selected for optimal sonic performance.

Conservatively rated at 60 watts per channel, the LP66S offers sufficient power for most applications. Users who have not previously experienced the dynamic range and lifelike timbre of tubed components will find the LP66S an ideal introduction to the joys of modern tubed amplifiers. For those who do require more power, the LP125M mono-block delivers a solid 125 watts. Along with the tonal integrity and faithfulness to the music that are embodied in these amplifiers, their ease of use, low maintenance costs, and reliability will be a revelation for those who have only experienced "entry-level" tube gear.

We invite you to visit your conrad-johnson dealer to audition an LP66S or LP125M and rekindle your passion for enjoying great music in your home.