9' Silver 9 AWG Speaker Cables Sonido de plata Shotgun configuration

9' Silver 9 AWG Speaker Cables Shotgun configuration

Performance approaching the very best and most expensive audio cables on the market, for a fraction of the price. Well below what audiophiles normally expect to pay for superbly engineered and hand crafted components. Best Value of any cables available.

Shotgun configuration provides incredible imaging and detail across the entire audio spectrum, deep, tight, powerful bass, sweet transparent mid range smooth and linear high frequency response.

4 Runs of 12 AWG Silver Plated pure copper, American Mil-spec Aircraft wire per channel

Conductors:

Silver, the best conductor available.

4 Runs of 12 AWG Sliver Plated American Mil-spec AEROSPACE wire per channel.
Silver-plated copper with 40 microinches minimum coating thickness.
Stranding 133/29

Insulation Material:

Teflon (PTFE) as a dielectric is very close to air.
Polytetrafluoroethylene (PTFE This heavy-wall wire, rated at 1,000 volts rms or 3,000 volts DC, saves both size and weight compared with many other insulated wires of the same rating.
Suitable for Broad frequency use at elevated temperatures in high-reliability programs where electrical and thermal stability are important.

Termination:
Red copper bananas :

Optimized Contact Pressure: The TST "Tensioned Split Tube" Banana Plugs feature a solid color coded silicone elastomeric tensioning element. This tensioning element provides the spring force required to enable the use of soft high conductivity copper. Traditional banana plug designs rely on the inherent spring force of harder low conductivity copper alloys to provide the required contact pressure to make the banana plug connection. Unfortunately, the copper alloys that have sufficient inherent spring tension also suffer from poor conductivity. The simple and effective design approach of the Tensioned Split Tube (TST) Banana allows our connector to be constructed of C14500 Tellurium 93% IACS Copper. Maximized Signal Conductivity:
The Sized Right, Maximized Contact Area and Optimized Contact Pressure features of the TST Banana plugs are significant factors in maximizing signal conductivity but there are other significant factors to consider as well.
• Solid Single Piece Conductive Path:
This line of banana speaker wire connectors are designed to have a single continuous conductive path from the wire to the end of the plug. This eliminates the added contact resistance associated with the common multi-piece design.
• Truly High Conductive Core Materials:
TST Bananas utilize C14500 Tellurium 93% IACS Copper and the SP series spades utilize C11000 100% IACS Copper which are the highest conductivity coppers available for their respective designs.
Materials like C36000 Brass, C54400 Phosphor Bronze, C17500 Beryllium Copper are the typical copper alloys used and all have low conductivities in the range of 19% to 40% IACS.
Bare Copper Non-Plated Connectors: The use of bare non-plated copper connectors provides the natural high conductivity connection of a bare speaker cable termination without the safety hazard of shorting wire strands. Bare electronic grade copper will not turn green or oxidize heavily under normal conditions and some simple handling practices will keep you copper looking and performing quite well for many years.

Please email any questions


12.95 Flat rate shipping