Wyred 4 Sound MPre/MAmp combo Save $300.00 on 250 watt monos & preamp/DAC

Ask us about 6 MONTHS NO INTEREST OR PAYMANTS thru PayPal

This ad is for a package of one Wyred 4 Sound mPreamp and two 250 watt m-Amps.

We have been asked many times for a deal on multiple purchases and here it is:
The Wyred mAmp is a 250 watt balanced mono amp based are the new B&O ASX series ICE amp. It does 430 watts into 4 ohms. It uses a 3rd generation Wyred input stage to allow it to work with all preamps, solid state or tubed, and to offer a more tube-like sound in the midrange. This new model outperforms the older ST500 and models from Jeff Rowland and Bel Canto that use the older series ASP ICE amp modules

Features & specs:

• Utilizes latest generation ICEpower® ASX audio technology


• 250w in 8Ω


• 430w in 4Ω


• External selectable mains voltage 115/230VAC


• Idle power consumption 9.5w


• Thermal protection


• Over current protection


• Sound optimized soft clip


• Robust construction


• Standard 12V DC Trigger


• Machined and anodized aluminum front panel


• Gold Plated unbalanced (RCA) input


• Neutrix Balanced (XLR) input


• 3rd Generation fully balanced input stage with impedance of 100k


• Compact size (8"W x 3.5" x 8"D)


• 8 lbs.


• Covered by a 5 YEAR WARRANTY


• 
  

The Wyred 4 Sound mPRE is a fully
balanced remote controlled preamplifier/DAC in one small box. It offers
much of the performance of the exceptional STP/SE preamp and DAC2 in one box at
a very affordable $1095.00.

The fully balanced, dual mono, dual
differential circuit design uses over 80 FET's which are paralleled up for much
lower noise and increased current output. Input and output stages have been
incorporated to preserves sonic integrity throughout the circuit.

The m-PRE has a built-in DAC with
three inputs which includes toslink, coaxial and USB. All of which support 24
bit 192kHz streaming. The ESS Sabre DAC utilizes Hyperstream™ and Jitter
Elimination Architecture rendering it immune to jitter. The USB interface is
derived from the latest asynchronous XMOS design which is certified USB 2.0
High Speed and Audio Class 2.0 compliant. Incredibly
low latency in conjunction with the asynchronous mode of communication and
ultra precise clocks permits for an exceptionally high quality level of digital
streaming.

The mPRE is equipped with 3 analog
inputs and outputs. Two of the analog inputs are RCA
and one can be configured as Home Theater bypass. The two RCA outputs are
typical pre-outs and one set can be configured as a fixed out. Finishing it
off is the XLR input and outputs which use high quality Neutrik connectors to
couple the purely balanced circuit with any other components you may have.
Single ended to balanced conversion comes at no extra charge and ensures that
all outputs are active regardless of the input signal type.

The m-PRE also has a high quality
headphone amp capable of driving headphones down to 16 ohms. The front panel is
machined from a solid piece of ¾” aluminum, line grained, and anodized in
black. A radius on either side of the front panel rounds the corners off
elegantly where the side extrusions extend to the rear of the unit and sport
the same high quality anodized finish. The top cover is available in clear
anodize (Silver) or black and has stylish venting allowing heat to escape.

mPRE Features:

Fully balanced, Dual mono design
Next generation input and output buffers


Built-in ESS DAC which supports 24 bit 192 kHz on all digital inputs
Asynchronous USB input which supports
Windows machines, is driverless for Mac,

Headphone amplifier

Remote Control

12V DC trigger input and output

Efficient (no heat)
Fully balanced input to output

Discrete input and output buffers

Unbalanced to balanced conversion (when RCA input selected and XLR outputs are

being used)

Robust construction

Machined and anodized aluminum front panel, top, and sides

100kΩ input impedance

1 set of balanced (XLR) inputs

1 set of balanced (XLR) outputs

2 sets of unbalanced (RCA) inputs (one is selectable as HT bypass)

2 sets of unbalanced (RCA) outputs (one is selectable as a fixed 2.0V output)
Home Theater Bypass
External selectable voltage mains
115/230VAC

High grade Schottky Bridges

Compact size (8"W x 3.5"H x 8"D)

8 lbs.
Covered by a 5 YEAR WARRANTY to the Original
Purchaser

The package is normally $3,100.00 and for a limited time SAVE $300.00 at $2795.00

We accept PayPal, Visa, Discover, MasterCard & money orders.
Read our AudiogoN #1 rated feedback and then call 770-667-5633 with
questions or to order this exceptional preamp/DAC/amp combo.

GA, CA & HI residents add sales tax.

Int'l orders are paid by bank funds
wire transfer only.

Brands carried:

Acoustic Zen, Ampzilla amps & preamps, Audio Space tube electronics, Audeze
headphones, Bob Carver tube amplifiers & loudspeakers, Burson Audio, Cambridge
Audio, Creek, Denon, DSPeaker, Emerald Physics speakers, amplifiers & USB
DAC's, Epos, Essence electrostatic speakers, Furutech ADL, Gallo speakers, Graham
Slee, HifiMan headphones, Jolida tube electronics, LSA amps and speakers,
Marantz Reference, Micromega, Music Hall, Peachtree Audio, Project turntables,
PS Audio, Pathos, Quad, REL subwoofers, Rolls Bellari, Silverline Audio, SONOS,
Spread Spectrum Technologies, Wireworld, Wyred 4 Sound, Wywires

Sales policies on the Underwood Hifi Inc website at www.underwoodhifi.com