Theta DigitalEnterpriseusedTheta Digital Enterprise Mono AmplifiersLittle brother to the Theta Digital Citadel, the Enterprise delivers a conservative 300 W to 8 Ohms and 500 W to 4 Ohms. I used them to power a pair of Apogee Diva Ultimates. The Enterprise mono-bl...2650.00

Theta Digital Enterprise Mono Amplifiers

Listing ID: lis698h7 Classified 
 Listed  · 269 Views

2 Watchers

Items from this seller

Time Left: Listing Sold

This listing has ended.

Condition
8/10
Payment methods

Contact seller after sale to pay viaCertified check

Ships fromMcKinney, TX, 75072
Ships toUnited States
Package dimensions30.0" × 21.0" × 16.0" (60.0 lbs.)
Shipping carriersUSPS or FedEx
Shipping cost$0.00
Original accessoriesBox, Manual
AverageResearch Pricing

Little brother to the Theta Digital Citadel, the Enterprise delivers a conservative 300 W to 8 Ohms and 500 W to 4 Ohms. I used them to power a pair of Apogee Diva Ultimates. The Enterprise mono-blocks are in immaculate condition both sonically and cosmetically. 
I am rating at 8/10 as I am the second owner. They have served me well, and as evidenced in the provided images, I have taken excellent care of them. Shipping for these amps will be at 60 lbs each and shipped in individual boxes (see images). Please ask for a shipping quote. 
Included in the sale are two Theta Digital mono amplifiers (as pictured) in original boxes with manuals and power cord.

Specifications:
Analog Audio Inputs


  • 1 Single-ended RCA jack.


  • 1 Balanced (XLR) jack.


Input Impedance

  • 50KOhm. Single-Ended or Balanced, for each phase.

Input sensitivity


  • (Single-Ended) 2.8V RMS input for 300W into 8 ohms.


  • (Balanced) 1.4V RMS input for 300W into 8 ohms. 


Gain


  • (Single-Ended) 25dB (18x).


  • (Balanced) 31dB (36x).


Polarity


  • (Single-Ended) Non-Inverting.


  • (Balanced) Pin-2 = Positive, Pin-3 = Negative for Non-Inverting Output.



Analog Audio Outputs

  • 1 balanced output (Cardas Type standard)

I / O RS232

  • 1 DB9 and 1 RJ45 connector.

Modes/Processes


  • Standby: Amplifier is muted and output bias is reduced to 10%.


  • Thermal: Channel has overheated; amp automatically switches to Standby.


Power Output


  • (8 ohms) 300 W (rated) 350 W (typical)


  • (4 ohms) 500 W (rated) 525 W (typical)


Frequency Response

  • (-3dB points @ full power) 0.5 Hz - 400 KHz.

THD+Noise
  • <1.75%

Signal to Noise Ratio

  • (unweighted) >105dB

Power Requirements

  • 117 VAC, 10A Slo Blo main fuse, 230 VAC, 6A Slo Blo main fuse, 50-60 Hz.

Power Consumption

  • 30W @ Standby; 53W @ idle; 525W @ full power into 8 Ohms; 925W @ 4 ohms.

Trigger Input

  • 5-12 VDC Pulse between 1 and 500mS.

Dimensions

  • 9 1/16" W x 13 7/8" H x 23 5/8" D (230 x 346 x 600 mm)

Weight


  • 51 Lbs. Stand alone (19 Kg)


  • 60 Lbs. Boxed with accessories (22.4 Kg)


Maxumium Operating Temperature


  • Internal: 176° F (80° C)


  • Room: 131° F (55° C)


No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 7 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.