Manley LaboratoriesChinookusedManley Laboratories Chinook Tubed Phono Stage - Like New!*** Item is available for shipping within the contiguous United States *** I have too many tubes!!! Since I've decided to use a tubed preamp to get the "glow" from both my analog and digital sourc...1600.00

Manley Laboratories Chinook Tubed Phono Stage - Like New!

Listing ID: lis6c5df Classified 
 Listed  · 713 Views

12 Watchers

Items from this seller

Time Left: Listing Sold

This listing has ended.

Condition
9/10
Payment methods
Ships fromOlathe, KS, 66061
Ships toUnited States
Package dimensionsunspecified
Shipping carrierUPS
Shipping cost$30.00
Original accessoriesBox, Manual
AverageResearch Pricing

*** Item is available for shipping within the contiguous United States ***

I have too many tubes!!! Since I've decided to use a tubed preamp to get the "glow" from both my analog and digital sources, I've found that a tubed phono stage is just too much of a good thing within my system...so here's your chance to grab one that is like new at a big discount. But act fast, as it's the only one on Audiogon, US Audio Mart or eBay as I type this ad.

I'm the second owner of this beautiful piece - I purchased it on 8/29/14 from the original owner. I've only used it when ripping vinyl (not for long analog sessions), so the tubes have probably about 75 hours or so on them from my use. You'll note that I've listed this item as "mint"...that's because I can see nothing that would distinguish this item from a brand new one that has just been taken out of the box for the first time. If you're the lucky buyer, you will soil yourself when opening it...because it REALLY does appear to be brand new - see the photos!

If you're reading this, you are probably quite familiar with this phono stage. It's one of the most configurable phono stages in existence - perhaps the most flexible tubed piece in production (save for its big brother the Steelhead). It's truly a wonderful piece that will provide years of listening pleasure from your vinyl collection.

Specs:

* Vacuum Tube Complement: 6922 x 2 (gain stage) plus 6922 x2 (output stage). Any 6DJ8, 7308, ECC88 types may be used
* Gain: Internal DIP switches select 45dB or 60dB
* Input Capacitance (MM/MC): 3-position selector yields 50, 100, 150, 200, 250, 300 or 350pF
* Moving Magnet Input Impedance: 47k Ohms, fixed
* Moving Coil (MC) Input Impedance: 5-position selector yields over 32 loading possibilities from 26 Ohms to 47k Ohms
* Unbalanced Input and Output connections via Manley Teflon® & Gold plated RCA jacks
* Automatic Mute Time
* Deviation from RIAA curve: Less than ± 0.5 dB from 20Hz to 20kHz at any gain setting. Typically less than ±1dB from 10Hz to 100kHz.
* Distortion (THD+N) (47k Ohm Input Termination, 45dB gain, 1kHz sine, 0dBu output): Typical 0.010% THD+N, into 100k Ohm load, BW = 100Hz-22kHz
* Distortion (THD+N) (47k Ohm Input Termination, 45dB gain, 1kHz sine, 0dBu output): Typical 0.030% THD+N, into 600 Ohm load, BW = 100Hz-22kHz
* Dynamic Range (MM input, Gain set to 45db, 200 Ohm source): 91dB @ 1kHz, 0.1% THD+N, BW = 22Hz-22kHz
* Dynamic Range (MM input, Gain set to 45db, 200 Ohm source): 107dB @ 1kHz, 1.0% THD+N, BW = 22Hz-22kHz
* Noise Floor at 45dB gain setting with shorted input: -84 dBu, A-weighted
* Noise Floor at 60dB gain setting with shorted input: -75 dBu, A-weighted
* Maximum Input at 45dB gain setting with 20 Ohm Source Z @ 1kHz into 10 kOhm load: 250mV RMS = +34.5 dBu @ 1% THD+N BW=22Hz-22kHz
* Maximum Input at 60dB gain setting with 20 Ohm Source Z @ 1kHz into 10 kOhm load: 40mV RMS = +34.2 dBu @ 1% THD+N BW=22Hz-22kHz
* Maximum Output: +37dBu @ 1kHz, 1.5% THD+N into 100 kOhm load
* Output Impedance: 91 Ohms
* Minimum Recommended Load: 2500 Ohms
* Internal Power Supply: Fully regulated linear B+, Heater, and control voltage rails.
* Operating Mains Voltage: Units are built for original destination country's mains voltage: 100V, 120V, or 220-240VAC as indicated on the serial number badge.
* Power Consumption in Standby mode: 1 Watt (8.0mA @ 120VAC)
* Power Consumption: 42 Watts (345mA @ 120VAC)
* Mains Voltage Frequency: 50~60Hz
* Power Transformer: Toroid contruction for low radiation.
* Mains Fuse for 100V-120V operation: 500mA SLO-BLO size 5mm x 20mm
* Mains Fuse for 220V-240V operation: 250mA SLO-BLO size 5mm x 20mm
* Standby Transformer Fuse for all voltage operation 100V-240V: 10mA, SLO-BLO, MDL type size 1/4" x 1 1/4"
* Badge Lamp: LED illumination

Includes: Original box and foam packing material, manual and power cord. Includes four Russian EH 6922 tubes. Item will be double boxed and insured for safe shipment.

Item will be shipped insured for a flat fee of $30.00 within the contiguous United States. Payment via PayPal.

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

No policies have been specified.