Sonance ASAP 1D

The ASAP1D will automatically switch a pair of speakers between a whole-home audio system that normally plays in the area (the House source), and a nearby source, usually a TV set or iPort® (the Local source). The ASAP1D can be set up so that it will automatically switch from the House source to the Local source when it senses either an audio signal or a video signal from the Local source. A typical application would be to use the ASAP1D to power and automatically switch a pair of speakers in a bedroom from playing background music sent by a wholehome audio system to playing the sound of the bedroom TV whenever the TV is switched ON.
The ASAP1D utilizes a highly-efficient digital amplifier that provides 25 watts RMS per channel in stereo. The ASAP1D produces high power in a small package, with very little heat generation. This expands installation options, improves longterm reliability and provides significant energy savings over conventional amplifier designs.


Specifications -

Number of Channels: 2 (one stereo pair)
Power Output 25 watts per channel @ 8 ohms
(both channels driven): 35 watts per channel @ 4 ohms

Fquency Response: 20Hz – 20kHz +1/–3dB (hi-pass filter OFF);
–3dB @ 27Hz (hi-pasres filter ON)

Total Harmonic Distortion: 0.10% (1kHz, 8 ohms)
0.25% (1kHz, 4 ohms)

Signal to Noise Ratio: 95dB (w/22kHz A-WTG filter)

Input Sensitivity: 485mV for 25W RMS output

Input Impedance: 47kohms

Power Consumption: 140 watts maximum (4 ohms, full power)
18 watts idle (no signal)

Heat Output: 43 BTU/hour @ 8 ohms (rock music)
60 BTU/hour @ 4 ohms (rock music)

AC Fuse (120V ver): 2A (T2AL ~ 250V)

AC Fuse (230V ver): 1A (T1AL ~ 250V)

Dimensions (W x H x D): 125⁄8” x 3” x 45/8” (321mm x 77mm x 118mm)