Mark Levinson 533H Three-Channel Amp

This unit was bought and used in our in house sound system for barely a month, far less than 100 hours on it and it is in great shape! Comes in original box with the power supply.

The No 533H shares the same basic amplifier module as the No 531H and
No532H but is a semi-monoblock design. With power supplies that can be
shared across multiple channels, this design lends itself well to
multi-channel environments where one channel might need more power at
times than others. All other features of the No 533H are identical to
the No 531H and No532H and the common design creates a consistent sonic
signature for use in multiple amplifier system configurations.

The four amplifiers in the No500H Series are the definition of truly
outstanding performance in their respective categories. Drawing from the
Mark Levinson heritage, while utilizing a new, straightforward,
balanced, current-feedback design creates a new series of amplifiers
that must be listened to in order to be fully appreciated. The final
result is impressive even for the Mark Levinson high standard of
excellence.

Main Features

Reliable, high-power in four different channel configurations provide ideal solutions for any system
Isolated chassis and signal grounds minimize noise, optimizing detail, even at low listening levels
Fully-differential circuitry with both balanced XLR and single-ended RCA inputs
Ethernet and 12V trigger control capability for system integration

Specifications

Input & Output Connectors
    • one balanced XLR input per channel
    • one unbalanced RCA input per channel
    • one pair “Hurricane” loudspeaker outputs with banana-plug sockets per channel
       (banana-plug socket not available on the 230 VAC models)
Control Connectors
    • one Ethernet 10Base-T port
    • one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
    • one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
    • 3-pin IEC standard power connector
Rated Output Power
20Hz to 20kHz at <0.5% THD, 300W per channel @ 8 Ω, full output from 2.25Vrms

Frequency Response within 0.5dB from 10Hz to 20kHz

Signal-to-Noise Ratio >85dB, reference level: 2.83 Vrms

Input Impedance 60 kΩ (balanced); 30 kΩ (unbalanced)

Voltage Gain 26.8dB

Input Sensitivity 2.83Vrms output at 130mVrms input

Power Requirements
100V~, 120V~, 230V~, factory set for destination country
Nº531H: 300W; Nº532H: 600W; Nº533H: 900W

Dimensions*
 • Height (with feet): 7.65" (19.4cm)
• Height (without feet): 6.97" (17.7cm)
• Width: 17.75" (45.1cm)
• Depth: 19.83" (50.4cm)