JBL 4410 Studio Monitor's REFOAMED, REFINISHED Beautiful

NEW FOAM ($80.00) on the woofers by Midwest Speaker Repair just last week.  I am selling these for a friend who inherited some L220's and has no room for both.  I refinished the cabinets for him 3 years ago and they are in the same excellent condition today with only minor surface marks that remained after sanding.  Back to factory rich Walnut color with no fading or damaged corners.  The pots have been cleaned and lubed.  

The grills are in excellent shape as is the logo bar on the bottom.  There is only one blemish in the cloth on the side of one of the grills.  Very hard to see.  The only issue with the grills is one broken peg on the bottom left of one and broken peg was no where to be found.  There was 2 other broken pegs that I glued back on and shaved them down a bit.  These grills are known to warp a bit and put pressure on the tight fitting pegs.  I lubed the rubber inserts and have successfully taken the grills off and put back on a couple of times without them breaking.  Very carefully.  Long term I am not sure if they will sustain multiple removal.  Magnets or Velcro maybe a solution in the future.  I will leave this up to the buyer.  The pots are set just past half for the treble and mids if the buyer just wants to leave them be.  There is complete specs and technical info from the JBL pro site.  Just google them.  I am including a photo copy of the Technical manual.  I am an excellent packer and use professional materials and boxes.  100% feedback here and on the other 2 sites. 
SPECIFICATIONS:

Frequency Range ( -6 dB) 35 Hz-27 kHz
Frequency Response (2 2 dB) 45 Hz-20 kHz
Power Ratme’ 125 watts
Sensitivity: 91 dB SPL. I watt (2 83 V) at I meter
Nominal Impedance: 8 ohms
Crossover Frequency: 800 Hz, 4 5 kHz
LOW FREQUENCY TRANSDUCER:
Nominal Diameter: 250 mm (IO in)
Voice Coil. 50 mm (2 in) diameter copper
Magnetic Assembly Weight: 2.7 kg (6 lb]
Flux Density: 1.08 tesla (10,800 gauss)
Sensitivity? 90 dB SPL, 2.83 Vat I m (3 3 ft)
MID RANGE DRIVER:
Nominal Diameter: 125 mm (5 in)
Voice Coil: 25 mm (I in)
Magnetic Assembly Weight: 0 74 kg (1.63 lb)
Flux Density: 1.25 tesla (12,500 gauss)
Sensitivity: 94 dB SPL, 2.83 Vat I m (3.3 ft)
HIGH FREQUENCY DOME RADIATOR:
Nominal Diameter: 25 mm (I in)
Voice Coil: 25 mm (I in) diameter copper
Magnetic Assembly Weight: 0 91 kg (2 lb)
Flux Density I .5 tesla (I 5,000 gauss)
Sensitivity?: 92 dB SPL. (2.83 V) at I m (3.3 ft)
GENERAL:
Finish: oiled walnut
Grille donor. dark blue
Dlmenslons 597 mm x 362 mm x 286 mm deep
(23% m x 14% m x I I % m deep)
Weight I9 kg (43 Ibs)
Shlppmg Weight 23 kg (50 Ibs)
‘Ratmg based on test signal of flltered random ncxse conformmg to mternatlonal standard IEC 268.
5 (pink norse with I2 dB/octave rolloff below 40 Hz and above 5000 Hz wth a peak-to-average rat,0
of6 dB) two hours duration
*Averaged from 100 Hz to 500 Hz wthm I dB
‘Averaged above 3 kHz wthln I dB
For more pictures you can go to manzaudio.com