Genesis Technologies 350 Loudspeakers with servo amp and SE mods

Experience the incredible sound and power of the Genesis 350 Loudspeakers. These particular speakers have had 350SE modifications which include Ribbon/XVO upgrades ($3100) that involve two new RD48G ribbons XOV upgrade and the improved servo bass cables that were released in 2004 (5 meter set for $3220).

Midrange and Tweeters
The midrange and tweeter sections are dipolar, meaning that sound radiates from the front and the back in a "push-pull" fashion. Dipoles achieve their superior performance because they create a radiation pattern where the energy emanating to the sides of the speakers is nearly non-existent. Not only is the placement of the speakers easy but, remarkably, you can experience the music free of normal room interactions which plague most other speaker systems.

Servo Woofers
The woofers produce sound similarly to the midrange and tweeters in a bipolar pattern. This allows for a more uniform bass response by exciting many different modes in the room rather than just one.

Modules
The 350's consist of two major modules: two midrange tweeter screens each containing a 4 foot midrange driver and three 1 inch ribbon tweeters in front with 1 ribbon tweeter in the rear, and an attached bass enclosure containing 4 eight inch metal cone servo woofers. The woofer system is powered by a 1500 watt, discrete, remote controlled servo power amplifier. The remote allows adjustments to amplitude, phase response, high pass and low pass filters.

Summary
With a total of 8 eight inch metal cone woofers, powered by a 1500 watt remote control amplifier, the bass performance of the 350 is simply astounding. Servo control of the woofers is the key factor in their performance. In traditional woofer systems, "heavy", "soggy", or "boomy" bass is present to some degree because the heavy mass of each woofer is not controlled. In a servo bass system, complete control of the woofers is made possible by the addition of a motion sensor (an accelerometer) mounted directly on the woofer itself.
Another benefit of the 350's self-amplified woofer system is that almost any sized power amplifier may be used to drive the midrange tweeter panels. No longer must you choose between having enough power to adequately drive the woofers and yet maintain the spatial qualities found in many small power amps. At 4 Ohms nominal impedance, the 350's can be driven with an amplifier as small as 70 watts per channel and can safely be used with amplifiers as powerful as 1000 watts per channel. 
Local pick up, Buyer paid shipping, or Personal Delivery with in 300mi radius of Baton Rouge, LA