Analysis Audio Omega Reference External Ref X-over with pure silver jumpers

These speakers are immaculate and ships in three wooden crates. The Omega Reference is six years old. The Omega Reference, a $29K plus speaker as configured, resides at the end of the chain of my $175K reference, dedicated, two channel audio system. They represent the closest audio reproduction I have experienced to my favorite concert hall – pre-renovated Carnegie Hall in NYC. Having lived in NYC for 14 years, it is a venue I frequented and know intimately. The modification I had installed in the Reference X-overs is an additional tap allowing for unrestricted high frequency extension. Ribbons, when done correctly (an extremely arduous and very expensive proposition) have none of the high frequencies aberrations found in nearly every other ribbon and speaker technology I’ve auditioned. Pure silver jumper wires are provided for X-over to speaker connection. And unlike electrostatics, present a benign 5 ohm load allowing any tube, transistor or hybrid amp of 100 RMS watts or greater to drive them effortlessly and play at reasonably high volume levels. The physical height of the Omega and the length of the ribbon tweeter permits the full frequency rang to be experienced even when standing and walking about the listening room. For sale only because I have recently moved into a house with a listening room of sufficient size to provide the acoustic space for the next larger planar offered by Analysis Audio – the Amphitryon. Specifications: OMEGA Reference Planar Power Rating: 50-400 watts RMS Frequency Response: 22-22K Hz External Reference Crossover Hz: 650 Hz Impedance: 5 ohm Sensitivity: 86dB (Effective sensitivity is 92dB due to radiation pattern unique to planar speakers) Dimensions: Planar Panel 5” 6’ H x 2’ W x 2.4” D. Foot increases depth to 16”. Weight (unboxed): 100lb.s each