Technics Sp10 Mk2Next GenerationusedTechnics Sp10 Mk2 Next GenerationDeveloped for those enthusiasts whom have expressed an interest in a model which further extols the musicality of the respected Technics Sp10Mk2 direct drive platform. Displayed above is an exampl...11895.00

Technics Sp10 Mk2 Next Generation

Listing ID: LIS4CHG7 Classified 
 Listed  · 2367 Views

chris74 

member since January 2003

Artisan Fidelity  Verified Dealer

Last 12 months
All-time336100.0%

0 Watchers

Time Left: None

This listing has ended.

Condition
8/10
Payment methods

Contact seller after sale to pay viaCertified check, Personal check or VISA/Mastercard

Ships fromHammond, IN, 46324
Ships toWorldwide
Package dimensions28.0" × 26.0" × 15.0" (150.0 lbs.)
Shipping carrierunspecified
Shipping costSpecified after purchase
Original accessoriesBox
AverageResearch Pricing

Developed for those enthusiasts whom have expressed an interest in a model which further extols the musicality of the respected Technics Sp10Mk2 direct drive platform. Displayed above is an example of our latest design which a result of years of modification work. The "next generation" model features our latest proprietary precision machined Copper Gunmetal alloy/Aircraft T6 grade precision CNC milled aluminum main platter and integral proprietary "Quiet Core" active bearing drain technology for absolute dead silent inky black backgrounds. This new design platform allows for even greater focus over conventional offerings, increased resolution and even lower overall noise floor. This latest or "next generation" design as a whole, characteristically is highly resolving and spot on in the areas of dynamics and neutrality, narrowing the gap even yet further between the Mk2 and coveted Mk3 Sp10 offerings. Pictured above in Porsche Carbon Black (Kuzma 4Point tonearm not included*). Design features directly coupled mass loaded Panzerholz plinth with zero internal voids and integral active Quiet Core shielded bearing drain technology. Constrained layer damped plinth features four levels of overlaying substratum consisting of German engineered Panzerholz, select low density woods in conjunction with anti magnetic metals permanently bonded and sealed together using synthetic material specific permanent bonding agents. Essentially, this aids in forming a non-resonant yet stable platform which has the ability to sustain decades of consistent use. Active isolation technology is employed through the use of Stillpoints patented vibration devices which enables even greater levels of focus, air and space around instruments and vocals within the soundstage. This isolation technology is further employed internally, at the core, to further lower unwanted residual bearing vibrations. Micro polish and oil re-lubrication service provided on the main bearing assembly. Technics factory speed control and logic circuits are located in a dedicated outboard shielded and damped aluminum chassis (not shown). A fully shielded control cable connects the logic controller to the separately housed motor and bearing assembly. The factory Technics SH-10E power supply (not shown) remains housed in the factory chassis and features a comprehensive rebuild and scope bench test with full one year warranty provided from date of purchase against defects. The turntable, bearing, motor and logic/control boards are all grounded from a common and defeatable ground located at the rear of the outboard controller chassis. In the event one should wish to revert the Technics Sp10Mk2 or Mk3 turntable back to the integrated factory chassis, this is entirely possible. Work performed by our certified electronics technician with 35+ years experience includes the following: Phase tracking timing bench test, Frequency and reference oscillator motor level calibration, Master Clock Crystal and axillary main board inspection, Power supply voltage and rails adjusted and scope checked, Removal of factory brake mechanism (reversible) and Technics SH-10E factory power supply fully rebuilt and bench tested. Packages are available which include a tonearm or tonearm/cartridge combination setup prior to delivery. Or, if you have a preferred tonearm and cartridge you would like to use, we can mount them for you prior to delivery. (9" and 12" tonearms, single and double arm configurations optional.)

Safe shipping is a high priority of ours and one we take seriously. We securely crate and pack our hand crafted turntables to ensure safe shipping anywhere in the world. ISPM-15 certified international shipping crates supplied for international orders.

Our precision hand crafted plinths are warrantied for one full year from date of purchase for any structural defects.

(*Please note classified ad for display purposes only, please inquire for current build/lead times.)

Sincerely,
Christopher Thornton
Artisan Fidelity
Hand Crafted Analog Designs

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.