*** EXPRESSIMOAUDIO ***VTA PRECISION CARTRIDGE ALIGNMENT GAUGE BLOCKSnew*** EXPRESSIMOAUDIO *** VTA PRECISION CARTRIDGE ALIGNMENT GAUGE BLOCKSEXPRESSIMOAUDIO VTA PRECISION CARTRIDGE ALIGNMENT GAUGE BLOCKS YOU GET 2 BLOCKS. The Blocks are made from White or Black Delrin and are Precision made. Gauge Blocks are made for setting up Cartr...19.95

*** EXPRESSIMOAUDIO *** VTA PRECISION CARTRIDGE ALIGNMENT GAUGE BLOCKS

Listing ID: lis5i723 Classified 
 Listed  · 365 Views

1 Watcher

Items from this seller

Time Left: None

This listing has ended.

Condition
NEW
Payment methods
Ships fromLincoln, NH, 03251
Ships toUnited States
Package dimensions6.0" × 6.0" × 6.0" (1.0 lbs.)
Shipping carrierunspecified
Shipping cost$2.50
Original accessoriesBox
AverageResearch Pricing

EXPRESSIMOAUDIO
VTA PRECISION CARTRIDGE ALIGNMENT GAUGE BLOCKS YOU GET 2 BLOCKS.
The Blocks are made from White or Black Delrin and are Precision made.
Gauge Blocks are made for setting up Cartridges to show you what VTA degree your cartridge is at to the vinyl.
Your Cartridge Instructions tell you what degree your cartridge should be at to start out with.
It is VERY VERY HARD to see 1 degree or 2 degrees.
Each side of the Gauge Blocks are marked.
One side is MINUS a degree and the other side marked as PLUS a degree
The side you see is - degrees.
but flip them over and you have + degrees.

INSTRUCTIONS
First find your Instructions and see what they tell you for setup.
1. Turntable Off.
Grab an old Album place it on TT.
You start out by folding a White Piece of paper in haft and putting it in the middle of the platter
on top of the vinyl.
Using Gauge Block that says 0° or what your cartridge instructions tell you and place it on the vinyl
about 1 inch away from the front of the cartridge, then GENTLY ,CAREFULLY
turn your platter backwards so the Gauge Block is very close to the front of the cartridge.
DO NOT TOUCH CARTRIDGE.
Now LOOK between the cartridge front face and the Gauge Block
You should have the same amount of light coming through.

-1° Degree there is more light showing at the bottom.
If more light is showing at the bottom then you have to lower the back of the arm.
Again please make sure you read you Instructions for the right VTA.

VTA SOUNDS
If you Place cartridge at 0°, you will notice that the sound stage is set back ( FLAT )
If you set your VTA with EXPRESSIMOAUDIO'S GAUGE BLOCKS at 1° Degree you will notice that the stage comes off the wall, it becomes BIGGER and Open. If you go too far it becomes unfocused, to much off the wall, things are too big.
VTA also can sound MUDDY or to BRIGHT and NO BASS
The only way to hear it, is to try it. That is why EXPRESSIMOAUDIO makes THE VTA GAUGE BLOCKS. So you as a TWEAKERS like EXPRESSIMOAUDIO can get every BIT of SOUND out of your System.

New Shipping Price
Shipping First Class Mail US Lower 48 is $2.50 add to $19.95 = $22.45 ONLY
WORLDWIDE SHIPPING PLEASE EMAIL ME FOR QUOTE
PLEASE VISIT EXPRESSIMOAUDIO FOR NEW EXCLUSIVE ITEMS !!!

PENDING PATENT

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 14 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.