Revelation Audio Labsumbilical power cable kitnewRevelation Audio Labs umbilical power cable kit for WAVAC PR-T1 preamplifier and LCR-X2 phono stageNEWS ALERTS Revelation Audio Labs has been chosen FOUR TIMES in a row by Stereophile magazine for their 2020, Fall 2019, 2019 AND 2018 Recommended Components, published here: https://www.stereophil...1800.00

Revelation Audio Labs umbilical power cable kit for WAVAC PR-T1 preamplifier and LCR-X2 phono stage

Listing ID: lis6c4cf Classified 
 Listed  · 177 Views

Time Left: Listing Sold

This listing has ended.

Condition
NEW
Payment methods
Ships fromPalm Coast, FL, 32137
Ships toWorldwide
Package dimensionsunspecified
Shipping carrierUSPS
Shipping costFree
Original accessoriesBox, Manual
AverageResearch Pricing

NEWS ALERTS

 

Revelation Audio Labs has been chosen FOUR TIMES in a row by Stereophile magazine for their 2020, Fall 2019, 2019 AND 2018 Recommended Components, published here: 


https://www.stereophile.com/content/recommended-components-2020-edition-cables

  https://www.stereophile.com/content/recommended-components-2019-edition-cables  

and  

https://www.stereophile.com/content/recommended-components-2018-edition-cables


Revelation Audio Labs was also chosen by The Absolute Sound magazine for the 2018 Golden Ear Award, published in their September issue (#286) - one of only three cable brands to be awarded the 2018 Golden Ear, the only digital cable chosen, and the only cable under the four thousand dollar ($4,000.00) price point.  Note: since NO CABLE was chosen for the 2019 Golden Ear Award, we currently remain as one of the last few cables to receive a Golden Ear Award.




All cables individually hand crafted in the United States. 

Attention all WAVAC PR-T1 preamplifier and WAVAC LCR-X2 phono
stage owners.

Of course you may be aware that the stock umbilical cables that
are supplied with your WAVAC are, with all due respect, mediocre at best, and
may be THE weakest links in your music chain. If you were to take a peak inside you would see very ordinary, inexpensive stranded copper insulated wire.  Upgrade from
that stock umbilical set and finally unleash the full performance your WAVAC
PR-T1 preamplifier combo or WAVAC LCR-X2 phono stage combo is capable
of, and that you paid top hard-earned dollar for! If you unwittingly allow your stock
umbilicals to remain in place, you shall never realize the astonishing sonic
potential you are completely missing, but that is so simply within your reach.  

Our CryoSilver Reference™ umbilical power cable set is phenomenal,
and is in use in fine audiophile systems by music lovers worldwide. 

By no means are these ordinary cables. These are precision
musical instruments, crafted by hand by their very designer, Bradley Vojtech.
Not a product of factory mass production, each cable is more akin to a work of
art. Our work in producing superior high end audio umbilical power cables for
over 15 years has rendered this as the present height of achievement and world
class state of the art.  

Be aware. Virtually each and every
high priced, 'high end' audio cable is derived from off-the-shelf wires, made
from inferior metals, extruded in poor insulators, which are the products of
machines which are designed to run wire and cable by the kilometer. This very
inexpensive wire comes off a gigantic roll from mass manufacturers that make
the most common, ordinary wire. The exterior of the cable is dressed up,
jewelry-like connectors are usually installed, and there you have your typical,
so-called 'high end audio cable'. Mass produced, packaged, marketed and advertised to project the illusion of high quality exquisiteness. This is the general wire and
cable industry infiltrating into the special audiophile cable market. The basic
difference between the off-the-shelf cable made by those huge corporations and
most high-end music cables boils down to only one thing...the label. The gospel
truth is most high end audio cables are not handmade with exacting attention to detail
by the hands of an artist who has a passion for music.  

Not so at Revelation Audio Labs! 

Each and every one of our cables is passionately handcrafted, starting with a
single bare conductor, and building upon that. Ours are not cables that are run
through machines ordained to spew out vast abundance of commodity.  Ours are literally by every sense of the term "made from scratch".

Not to belabor you here, as we encourage you to study our web site Technical
Design
page for a full thesis on our design technologies - but as a brief
synopsis, this cable set features:

• We start with bare single crystal five-nines (5N) ultra-pure
solid core CryoSilver™ conductors – deep cryogenically treated in our exclusive
vacuum cryogenic process. Silver is the most electrically conductive of all the
elements, and our silver is not your father’s silver.  The raw, uninsulated wire used is made by a U.S. company that specializes in precision silver wiring technology primarily for advanced aerospace and medical imaging industries

• Big Air™ dielectrics – the air envelope of each discreet
conductor is greatly oversized in diameter relative to the conductor diameter
within it 

• NOS U.S. manufactured transparent PTFE Teflon isolator tubes –
hermetically sealed to form the air dielectrics. This system provides an air
dielectric that is unaffected by ambient atmospheric conditions

• Progressive Hand Wrap™ discreet solid shields for each
conductor pole, isolating each conductor/dielectric sub-assembly from all
others within the cable array, to eliminate EM effects, cross talk, and eddy
currents 

• Triple-layer solid and helically-woven U.S. made military specification stranded outer
shieldings  

• All shieldings drained to the source ends only (to carry
absorbed internal and external EMI/RFI noise harmlessly away from the
music) 

• All highest quality MIL-SPEC genuine Amphenol connectors – not
the Asian imitation “knock-off” connectors used on the stock cables. Feature
silver contacts for seamless metallurgic compatibility and synergy with our
conductors 

• Conduits feature our Ceramic MicroSphere™ technology for
absorbtion and dissipation of vibrations, resonances and microphonics, both
internal to the cable and external, mechanical and air bourne, as well as for
the control of EM energy 

• Finally the conduit is covered externally with our new Conductive Carbon
Infused Composite (CCIC) jacket. This advanced technology material provides
superior EMI/RFI/EMF shielding of the cable. The negative affects that static
electrical fields and charges have on audio cables is well documented. In
addition to augmented shielding, crucially the Conductive Carbon jacket
provides ESD (Electro Static Discharge) protection as it dissipates static
fields and charges, also eliminating static electrical charges from
accumulating in the first place, as their presence robs performance as it does
with standard cable insulation. The material absorbs and dissipates static
electricity charge build-ups, which occur naturally on common non-conductive
materials. It is typical for these charge levels to be in the thousands of
volts. All areas of audio performance are enhanced by eliminating static
electrical fields and charges from the surfaces of cables
. Virtually all
other audio cables suffer from the negative sonic effects of stray fields upon
the cable

• Cables are fully conditioned on our audiodharma Cable
Cooker
and connector contacts are treated with Walker Audio E-SST
Extreme Super Silver Treatment
contact enhancer prior to shipment 

The above WAVAC PR-T1 preamplifier / WAVAC LCR-X2 phono
stage umbilical cable set includes the following four cables: 

(two) 0.75-meter, 10-pole, from TR-B1 Power Transformer Box to
PS-X2 Power Supply 

(two) 0.75-meter, 7-pole, from PS-X2 Power Supply to preamp or
phono stage  

SPECIAL DISCOUNT PRICE FOR AUDIOGON MEMBERS ONLY 

The regular cost of the four-cable set is $3,999 (nearly $6,400
if you were to purchase each of these cables from us separately). However, as a member of
AudiogoN you may have a set for the special discounted price of only $3,499 – a
savings of $500. Please consider the average price-per-cable on the set and
further realize the value this kit represents.  

As with all of our cables, we offer a 30 day risk-free audition
period. Use them for a full 30 days, if you are not pleased, you may return
them for a refund. However, I am pleased to inform you that 100% of our
customers who have ordered the WAVAC PR-T1 preamplifier / LCR-X2 phono
stage umbilical power cables are absolutely stunned and thrilled with how they
optimize the performance of the PR-T1 preamp combo / LCR-X2 phono
stage combo, finally enabling the full sonic potential of the preamplifier
and power supply kit to be realized.  

The cable set is available for immediate shipment.  If your installation requires longer lengths, simply let us know and we will send you the respective
PayPal invoice.  

Keep this in mind. We are uniquely positioned to custom-build
any cable to accommodate your requirements and/or specifications, utilizing our
highly reviewed technologies—such as to substitute for an inferior “stock”
cable. You will literally be amazed at the performance enhancement such an
upgrade will make. Every customer has stated it is the most cost-effective
improvement they had ever made to their system, surpassing an equipment
replacement upgrade! We would also be delighted to “hot rod” any of our cable
designs to your specifications. Our designs are in use in fine audio studios
and other professional applications. In fact, did you know that our digital
cables are actually in use in-flight by NASA?  

TERMS:  

We pay the cost of shipping worldwide. 

We prefer PayPal, but will only accept a check or postal money
order from U.S. buyer, or only a postal money order from a Canadian
buyer. 

We offer a 6-month no-interest financing program. 

Revelation Audio Labs does not play the game of offering various
models, with their respective price points, of a type of cable for a
prospective application. This is because each of our cables is simply the very
best that it can possibly be, period, and comparable to the very finest cables
available, period. Yet, our prices are very competitive, because our factory-direct
sales eliminate inevitable distributor mark-up. 

We sell directly to the end user, to save you money, but our
cables are also proudly carried by the insistence of these fine high end audio
dealers: 

High End Cable (United Kingdom) 

True Audiophile (Portland, OR) 

Affordable Audio (Playa del Rey, CA) 

Audio Extreme (Hong Kong)  

Igal Sabo High End (Israel) 

ES Audio (South Korea) 

Since February 2000, celebrating our THIRD DECADE of selling our cables on AudiogoN! View our
hundreds of great buyer feedbacks dating back to early in the year 2000. What other
cable maker selling on AudiogoN can make that claim? We are very proud of our
success on AudiogoN, and for all the many people it has enabled us to meet and
serve. Thank you for your support. You are most important to
us.
Without you, we could not do what we do - to be deeply involved in fine
music and the beauty it brings to life, bringing you closer to the music you
love. I look forward to hearing from you very soon, and to sending you your new
cable set. Thank you again!!!

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 30 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.

Special Conditions

Risk-Free 30-Day Audition Guarantee - try the cable in your system for a full 30 days. If you are not pleased, you may return it for a refund.