Peachtree Audio Decco 65 Cherry

decco65 Specifications

decco65 Back Stage Pass

1) Trigger: Automatically turns on another triggered device.

2) USB Digital Input: Takes digital audio-content from your computerʼs USB and sends it to the Sabre DAC via asynchronous communication.

3) Optical Input: Common on CD players, cable boxes, Apple products, and other digital audio sources.

4) Coax 1 and 2: Common on CD players, Sonos players, Slim Devices Squeezebox, and a host of other digital audio sources.

5) Aux: Common on tape decks, phono boxes, and a host of other audio sources. We recommend using a digital connection when possible to take advantage of the Sabre DAC.

6) Pre Out: For external amp or subwoofer.

7) Speaker Terminals: 5 way binding posts. Spades, banana plugs or bare speaker wire.

8) Standby Switch: Turns mains on and off.

9) Detachable Power Cord

10) Voltage Switching: For international use.

Amplifier
Class D amp modules 65 watts per channel <0.5% 
distortion into 8Ω, 95 watts per channel <0.5% 
distortion 4Ω, 20Hz-50kHz +/- 0.1dB

Preamplifier
Hybrid tube design (triode 6N1P) 5V output @ 2.0V input 
Max output: 7V rms / 11.2V peak 
Class A output stage <50Ω

Headphone Amplifer
Class A output with 6N1P tube in the circuit 
Maximum output power: 100mW into 8 Ohm / 300mW into 150 Ohm / 150mW into 300 Ohm 
Output impedance: <30Ω
Suitable for all electrodynamic headphones

DAC
ESS Sabre 9023 Upsampling 24/192
Sampling Rates : 44.1, 48, 88.2, 96, 176, 192
USB Asynchronous up to 24/192
Optical Up to 24/96
Coax Up to 24/192
<3ps jitter measured at master clock

Power Consumption
300w max <1w standby

Dimensions HxWxD
4.37” x 14.8” x 11.5”
111mm x 377mm x 292mm
(including volume knob and speaker terminals)

Weight
28lbs

Warranty
2 years parts and labor