Parasound Halo C2 Beautiful John Curl designed C2 pre amp/processor

Parasound Halo C2 Surround Controller Preamplifier

•  Dolby Digital EX, DTS ES, and Dolby Pro Logic II surround
•  THX Ultra2 Certified with THX Surround EX
•  7.5 Channel Enhanced Surround; 7.1 with 4 programmable outputs
•  Additional DSP modes include Surround Music and Party
•  Patented hybrid bass management prevents time smearing
•  Automatic digital audio and video input selection
•  Nine balanced outputs, two balanced inputs with XLR connectors
•  Four audio only inputs plus a tape monitor/external processor loop
•  Eight digital inputs; two digital outputs
•  7.1 analog input with pure analog path, bypasses DSP
•  Six audio/video inputs with composite and S-Video connectors
•  3 composite video and 3 S-Video outputs: OSD, no OSD, record
•  2 assignable component/RGB video inputs with separate H and V Sync
•  1 component/RGB video output with separate H and V Sync
•  BNC to RCA adapters are included for component video jacks
•  Component inputs/output pass 1080i and 720p signals flawlessly
•  Digital inputs and surround modes are assignable to sources
•  Presets for optimum analog input levels for various sources
•  100% automatic calibration of channel levels and delay times
•  Calibration microphone with 25’ cable included
•  Dual zone control with analog audio and composite video outputs
•  External IR input jacks for main and second zone
•  Three 12v triggers, two programmable for events; wires included
•  Fully upgradeable and controllable via two-way RS-232 port
•  3u chassis, rack mountable

        Frequency response:
        digital inputs 20 Hz - 42 kHz
        analog inputs 20 Hz - 22 kHz
        7.1 channel input 5 Hz - 200 kHz +0/-3 dB

        Total harmonic distortion:
        digital inputs <.002%
        analog inputs <.002%
        7.1 channel input <.002%

        Signal to noise ratio:
        digital inputs 102 dB
        analog inputs 98 dB
        7.1 channel input 107 dB

        Maximum input levels:
        balanced 35 V rms
        unbalanced 3.6 V rms
        7.1 channel input 8 V rms

        Maximum output levels: balanced 16 V rms
        7.1 channel outputs 8 V rms
        programmable outputs 8 V rms

        Video bandwidth:
        composite and S-video (non OSD) 30 MHz
        component video 300 MHz

        Dimensions:
        17-1/4" w x 7-5/8" h x 16" d; 5-1/4 " h without feet

        Net weight: 18 lb.
Some minor scratches as seen in pictures-still beautiful overall and sounds great!
No manual or original box- both remotes included