Luxman L-550a mkII
Listed · 1356 Views
This listing has ended.
Listings Similar to Luxman
Time Left: Listing Sold
This listing has ended.
Condition | |
Payment methods | |
Ships from | Metairie, LA, 70002 |
Ships to | United States |
Package dimensions | unspecified |
Shipping carrier | FedEx |
Shipping cost | Free |
Original accessories | Remote Control, Box |
Average | Research Pricing |
This unit is in like new condition and sounds every bit of Luxman's great reputation. This unit is a swiss army knife of goodness. It has a pre-amp with MM/MC phono stage section and and Pure class A amplifier section. The two sections are connected by jumpers. This means that the user could use the pre-amp alone with another amp as the amplifier could be driven using other electronics. The phono pre-amp and record out are indispensable to the audiophile who wants to digitize their vinyl recordings. An A to D would be fed a great sounding signal. I used this unit to digitize my vinyl and I'm very happy.
Bad news is I lost the original U shaped jumpers (they were not of particularly good quality that someone would miss). Instead., I'm including a set of custom made jumpers from Zu Audio. There is an extra out in the form of the Y jumpers. This makes it possible to use subwoofer(s) or other amplifiers with regular RCA cables.
Specifications
Continuous Output
20W + 20W/8Ω Class A
40W + 40W/4Ω
Total Harmonic Distortion
0.006% or less
(8Ω at 1KHz)
0.03% or less
(8Ω from 20~20KHz)
Input Sensitivity /impedance
.
.
.
Output Impedance
PHONO (MM)
: 2.5mV/47KΩ
PHONO (MC)
: 0.3mV/100Ω
LINE
: 180mV/42KΩ
BAL. LINE
: 180mV/79KΩ
MAIN-IN
: 450mV/51KΩ
57mOhm
Output Voltage
RECORDER: 180mV and PRE-OUT: 1V
Signal-to-Noise Ratio
PHONO (MM)
: Above 91dB
PHONO (MC)
: Above 75dB
LINE
: Above 106dB
Frequency Response
Tone Controls
Loudness Control
PHONO
: 20Hz~20,000Hz (±0.5dB)
LINE
: 20Hz~100,000Hz (+0dB ~ -3dB)
Bass ±10dB at 100Hz and Treble ±10dB at 10kHz
+7dB (±1dB) at 100Hz, +5dB (±1dB) at 10kHz
Controls
Power meter, headphones jack
Recording selector
Speaker selector (A and B), stereo / mono selector
Tone controls, balance and direct line
Sub sonic filter, loudness and line phase sensor
Remote control
Electric Power Consumption
190W (on, but without a signal), 1.3W (idle)
Dimensions
18.3” (W) × 7” (H) × 17.1” (D)
Weight
48.4 lbs
No questions have been asked about this item.
Ask the seller a public question
You must log in to ask a question.
Return Policy
Return Window
Returns are not accepted on this item.