T+APULSAR R1230RusedT+A PULSAR R1230R Silver finish.Sunny Components Inc. 1370 E Cypress Street, Ste D. Covina, CA-91724. USA.626-966-6259. Amazing Integrated receiver with a fantastic tuner. This Integrated has the ability to bi-Amplify your Spe...2950.00

T+A PULSAR R1230R Silver finish.

Listing ID: lis6bh8c Classified 
 Listed  · 385 Views

smer319 

member since November 2009

Sunny Components Inc  Verified Dealer

Last 12 months
All-time975100.0%

1 Watcher

Time Left: None

This listing has ended.

Condition
9/10
Payment methods

Contact seller after sale to pay viaVISA/Mastercard, Personal check or COD

Ships fromCovina, CA, 91724
Ships toUnited States
Package dimensions?" × ?" × ?" (30.0 lbs.)
Shipping carrierUPS
Shipping cost$100.00
Original accessoriesRemote Control, Box, Manual
AverageResearch Pricing

Sunny Components Inc. 1370 E Cypress Street, Ste D. Covina, CA-91724. USA.
626-966-6259.


Amazing Integrated receiver with a fantastic tuner. This Integrated has the ability to bi-Amplify your Speakers making it a giant Killer ! 



Matches well with Aerial Acoustics Model 6T, Model 7T and the Model 9.


Specials available on speakers and cables. 


We have several T+A Products coming in stock from the factory.  Some of these products are selling at huge savings. 

We have 1 unit available in silver finish. Unit was used as store demo model.
Description from manufacturer: The R 1230 R is the perfect symbiosis of two superb individual components: the PA 1230 R integrated amplifier and the T 1210 R tuner. The double-sided circuit board of the tuner section incorporates SMT technology to produce a miracle of miniaturisation, and its extremely short signal paths are responsible for the simply outstanding RF characteristics. The sound qualities and measured values of the amplifier section are identical to those of the PA 1230 R, and that amplifier’s enormous output power is present in full. In all R-series devices T+A deliberately uses the same overall technology and design philosophy, with the result that all our products feature very similar sound qualities. A good example of this is the presence of our sophisticated ICA technology and push-pull class A mirror current stages in our receivers as well as our pure amplifiers
GND The ground lead from an analogue disc player is connected here in  order to avoid hum. FM-ANT The R 1220 R is fitted with a 75 Ohm antenna input labelled FM ANT,  which is designed to match a standard domestic antenna and cable  input. CD Input for connection to the digital output of a CD mechanism. AUX / Phono General purpose pre-amplifier input with an input sensitivity of 250  mV / 20 kΩ . If an MM or MC phono module is fitted then AUX 2 is the  phono input. With MM phono module: Input socket for disc players with moving magnet (MM) cartridge  systems. Input capacitance (100 pF ... 500 pF) and input sensitivity  (1 mV ... 5 mV) variable by means of switches. Simply set the values  closest to those stated by the cartridge manufacturer. With MC phono module: Input socket for disc players with moving coil (MC) cartridge systems.  Input impedance (5 Ω ... 650 Ω ) and input sensitivity  (50 uV ... 1000 uV) variable by means of switches. Simply set the  values closest to those stated by the cartridge manufacturer.  TAPE 1 Input and output sockets for connecting devices which can record and  play back (recorders). TAPE 2 Input and output sockets for connecting devices which can record and  play back (recorders). The input is equipped with an input buffer to be  connected to source units with high output impedance (>1kOhm ). TV Input sockets for connecting high-level signal sources such as TV or  VCR. The input is equipped with an input buffer to be connected to  source units with high output impedance (>1kOhm ). R 1230 R  PRE Variable asymmetrical pre-amplifier output fitted with cinch sockets. As this is a very low impedance output it is suitable for long leads (e.g.  to connect active speakers). SPEAKER A + B Two pairs of loudspeakers can be connected to the amplifier  (SPEAKER A and SPEAKER B). The impedance of each speaker  must not be lower than 4 Ohm (DIN rating). RC-IN Input socket for the E 2000 remote control receiver. RC-OUT The remote control signals are transferred to the source devices via  the remote control leads RZ 001, which are plugged into the RC-OUT sockets. RLink Control output – preparation to control futur "R"-system components  with extendend functions. A software update may be necessary. TASI Connection to T+A Surround decoder. Specifications Pre-amplifier Frequency response + 0 – 3 dB 0,5 Hz – 400 kHz Signal: noise ratios (A-weighted) High level 5 x 104 / 109 dB Phono MM 82 / 86 dB (Non-standard version) MC 78 / 82 dB (Non-standard version) Sub-sonic filter fixed (Non-standard version) Total harmonic distortion < 0,001 % Intermodulation < 0,001 % Channel separation > 90 dB Nominal input sensitivity High level 250 mV / 20 kOhms MM 1 – 5 mV 16 capacitances MC 60 – 1000 uV 16 impedances Outputs Headphones 50 Ohms 2 x Tape 250 mV / 100 Ohms PRE out Cinch nominal 1 V eff max. 9,5 V eff Impedance 22 Ohms Dolby surround interface with fixed level (TASI) present Output stage Nominal output 8 Ohms 100 Watts per channel 4 Ohms 150 Watts Peak output 8 Ohms 150 Watts 4 Ohms 290 Watts Power bandwidth 1 Hz – 300 k

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.