McIntosh MHT-200 audiophile receiver in mint condition!

MSRP: $6100 SoCal HiFi Price: $2500 Interested? Send an email to [email protected]! For Sale: McIntosh MHT-200 (MHT200) in very good condition with manual, remote and original box. The MHT200 combines the flexibility of a premium home theater processor and the power of eight individual amplifiers all in a single component. With switching provided for Component Video, S-Video and Composite Video and eight analog and six digital audio inputs, you won’t outgrow the MHT200 anytime soon! Processing formats include DTS; DTS ES; DTS Neo: 6; Dolby Digital; Dolby Digital EX and Dolby ProLogic II. Each of the eight-monoblock amplifiers provides 140 watts of power to easily meet the demands of dynamic home theater sound while also providing built-in amplifiers for a second zone of audio. Imagine…six channels effortlessly powering your home theater while the other two channels let you listen to a different source (like a CD) in another room! The MHT200 also provides an expansion slot for an optional highperformance AM/FM stereo tuner. Have your dealer install the optional tuner module and enjoy the AM/FM quality McIntosh is famous for. ---SPECIFICATIONS--- PERFORMANCE SPECIFICATIONS PREAMP SECTION FREQUENCY RESPONSE (L/C/R/LS/RS/LB/RB) +/-0.5dB from 20Hz – 20kHz (Sub) +/-0.5dB from 20Hz – 140Hz This channel has an electronic low pass filter with an 80Hz corner frequency and 24dB per octave roll off in all modes except external. OUTPUT IMPEDANCE: Less than 560 ohms all channels MAXIMUM VOLTAGE OUTPUT: 8V TOTAL HARMONIC DISTORTION: All channels, 0.05% from 20Hz to 20kHz SENSITIVITY: Line Level: 100mV IHF Dolby Level: 200mV input External Input: 200mV for 2.0Vrms A-WEIGHTED SIGNAL-TO-NOISE RATIO: All outputs greater than 90dB below reference level. MAXIMUM INPUT SIGNAL: Analog Input: 6Vrms POWER AMPLIFIER SECTION POWER OUTPUT ZONE A: Minimum sine wave continuous average power output per channel with specified number of channels operating is: Rated Power Band (80Hz to 20kHz) into a 4 ohm load: 2 x 160 watts 3 x 140 watts 5 x 130 watts 6 x 120 watts POWER OUTPUT ZONE B: Minimum sine wave continuous average power output per channel with both channels operating is: Rated Power Band (20Hz to 20kHz) into a 4 ohm load: 2 x 150 watts OUTPUT LOAD IMPEDANCE: 4 to 8 ohms. RATED POWER BAND: 20Hz to 20kHz TOTAL HARMONIC DISTORTION: 0.05% maximum harmonic distortion at any power level from 250 milliwatts to rated power per channel. FREQUENCY RESPONSE: +0, -0.25dB from 20Hz to 20kHz +0, -3.0dB from 10Hz to 100kHz SENSITIVITY: 1.0V A-WEIGHTED SIGNAL-TO-NOISE RATIO: 92dB (112dB below rated output) INTERMODULATION DISTORTION: 0.05% maximum if instantaneous peak output does not exceed twice the output rating per channel. OVERALL DIMENSIONS (H x W x D includes knobs and feet) 9-7/16" (23.97cm) x 17-3/4" (45.09cm) x 20-1/8" (51.16cm) WEIGHT: 73 lbs. (33.1Kg) net 87 lbs. (39.5Kg) boxed