Merrill AudioANAP InterconnectsnewMerrill Audio ANAP Interconnects Long run XLR - lowest capacitance Best Details$1,149 per Pair, up to 3 meters (10 ft)Compare to other interconnects to see what the capacitance of the interconnects are. These are long run - up to 50ft, interconnects with 18AWG wire. Transpare...1149.00

Merrill Audio ANAP Interconnects Long run XLR - lowest capacitance Best Details

Listing ID: lis5dd1d Classified 
 Listed  · 425 Views

0 Watchers

Items from this seller

Time Left: None

This listing has ended.

Condition
NEW
Payment methodsContact seller

Contact seller after sale to pay viaCertified check, Personal check, VISA/Mastercard, American Express or Discover

Ships fromBernardsville, NJ, 07924
Ships toWorldwide
Package dimensionsunspecified
Shipping carrierunspecified
Shipping cost
Original accessoriesBox, Manual
AverageResearch Pricing

$1,149 per Pair, up to 3 meters (10 ft)

Compare to other interconnects to see what the capacitance of the interconnects are. These are long run - up to 50ft, interconnects with 18AWG wire. Transparent, Natural and very musical. You will hear every detail at the lowest volume without any compression or frequency roll off. 

Hear the ANAP Interconnect to hear the difference - Audio Purity.

Design philosophy.

Getting Natural sound means allowing the signal to travel as fast as it can, unhindered by inductance, capacitance and resistance. Keeping a single metal allows the full signal the maximum path with a single arrive time for the signal, better detail, better control, better transparency. Single, bare wire is the best connection. Keeping the wire the shortest is also the best. To that end, the Merrill Audio Speaker Cables and Interconnects are built to achieve transparency and natural sound, being neutral to the system with unhindered detail and clarity. If the source is good, it will show right through. Your system gets transparent. You get control and maximize your good components in the system.

To keep the sound natural, the finest OFC copper is used for natural timbre. Using heavy gauge wire, and oversize or too heavy, the cables are as transparent and natural, transmitting the sound as it should be. The Cable tries to disappear between the components. Keeping the cables to only copper allows transparency of the signal to travel and the audio system to breathe and sound natural.  

The configuration of the cables has a very big influence of on the cable sound through the resistance, inductance and capacitance of the cable. To keep it flat at all audio frequencies, each of these components must be the lowest to the point where it does not affect the audio frequency and signal. Low inductance helps keep speaker control and speed, especially at the lower frequency levels. To that end, a great deal of focus has been in using low inductance cables that also have very low capacitance. The higher gauge wires have lower resistance which helps with distance and speaker control. All of this keeps the cables delivering a natural sound, with speed and has the cable disappearing from the system allowing the audio systems components to shine.

To keep the low impedance and natural sound, the speaker cables are cold welded to Cardas Rhodium over silver plated spades. Cold Welding fuses the wire without heat, making it appear as a single continuous wire where the spade is now part of the wire. Cardas Spades which are the highest quality spades are used.

Cardas XLR and RCA connectors are used for the Interconnects to keep the integrity of the Interconnect cables and its natural sound. Using  18 AWG cable for the interconnects in a tight configuration allows for long runs, keeping transparency and natural sound. This is also critical in short runs.

Achieving the goal of natural sound and transparency, Merrill Audio ANAP series cables let your audio system get to its maximum potential, showing every detail of the music and the audio components. Audio Purity!

ANAP Interconnect Specifications:

• Wire Gauge: 18 AWG each conductor

• Capacitance: 50pF/m(16pF/Ft)

• Inductance: 0.8μH/m (0.24μH/Ft),

• Resistance: 0.024Ω/m(0.008Ω/Ft)

• Termination: Cardas XLR Connectors , Rhodium over Silver Plate

Cardas RCA Connectors, Rhodium over Silver Plate

Non-Magnetic Casing with Gold Plate.

We appreciate you browsing. Happy Listening!

www.MerrillAudio.net

Or call us with any questions 415 5-MA-HiFi (415.562.4434)

No questions have been asked about this item.

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Item can be returned within 30 days of receipt.

General Terms

Items must be returned in their original condition, with all included packing materials and no signs of use. Buyer assumes responsibility for all shipping return costs unless the item was not received as described.

Refunds

Buyer will receive a full refund in the original payment method less any shipping charges.