New Items Added
Limited Time Only
Ask us about 6 months No Interest thru PayPal
For a limited time we are selling the PS Audio Perfect Wave P3 Power Plant for only $1995.00, a $500.00 savings. Plus get a free $240.00 2m AC3 power cord with purchase.
The P3 is a smallest and most affordable of the PS power generating stations. The P3 produces pure, protected AC capable of powering any size high-end system. This state-of-the-art power center produces fully regenerated power for all sources and smaller power amplifiers along with a high current filtered output that can drive even the largest power amplifiers made. It is controlled by the included remote control or over the Internet. There are 6 regenerated outlets that produce up to 800 volt/amps and a set of filtered outlets for very large power amplifiers and or hi powered subwoofers.
From the biggest power amplifiers to the smallest pieces of source equipment, this combination of regenerated AC coupled with a high current unrestricted filtered zone will improve your system’s performance.
With your system powered directly from the output of the P3, dynamics and openness are unquestioned.
How does it work?
The PerfectWave P3 Power Plant takes your incoming AC power and converts it to DC, similar to what comes out of a battery, and then with patented PS Audio technology regenerates and produces new sine-wave-perfect, regulated high current AC power. In the process of regeneration any problems on your power line such as low voltage, distorted waveforms, sagging power and noise are eliminated.
Whys is the Power Plant far superior to a typical line conditioner?
The power that comes out of your home’s wall socket is unregulated, variable and prone to distortion. Inserting a standard power conditioner only makes that situation worse or has little remedy for the problem.
Only a regenerator, like that found in the Power Plant, can address the major issues of our home’s power.
To handle the challenge, inside each Power Plant is a large power amplifier that delivers the new and distortion free AC to your equipment. The power amplifier is fed from a low distortion digital sine wave generator and controlled from the internet right from your computer.
The internal power supply stores enough energy to allow the power amplifier inside the Power Plant to deliver massive amounts of energy to your equipment. Peaks of more than 35 amps can be delivered when a typical home wall receptacle can only provide 15 amps.
Ultimate surge and spike protection:
Owners who have invested in a Power Plant can rest assured their connected equipment will be safe from any power line event such as over voltage, under voltage, surges, spikes and potentially threatening problems.
The input voltage to the Power Plant is fully protected by state-of-the-art clamping devices and the output of the Power Plant is fully regulated so even large voltage swings that would normally damage connected equipment are made safe by either clamping or regulating. In most cases, connected equipment enjoys the protection and performance benefits of fully regulated power, even under extreme circumstances.
In the event of a major surge or spike, the Power Plant will automatically remove power from all connected equipment and shut itself down. When power is restored to normal, the Power Plant will safely turn all connected equipment back on in the sequence owners have set up for it.
750 VA output
100% regenerated AC
Two filtered High Current outlets
Control over the web or network
Adjustable output voltage
Built in Boulder, CO USA
Whisper cooling fan
The P3 features MultiWave. One of the major advantages of generating new power from old is the ability to also generate new waveforms that enhance the capabilities of the power feeding your equipment. MultiWave extends the peak charging time of the sine wave so connected equipment has more energy storage and less power supply ripple. Turning MultiWave on is like adding a larger capacitor bank to your connected equipment’s power supply. The audible results are dramatic and produce a bigger soundstage that sounds far more natural than with a simple sine wave.
100 times lower Output impedance than the wall. Low output impedance is critical to maintaining a dynamic and robust presentation. Dynamic sags in the power line occur whenever your power hungry equipment demand power to drive your loudspeakers or projector causing noticeable degradation in the performance. Placing anything in the path of the power, like a power conditioner, only worsens the problem.
A Power Plant, on the other hand, regulates the power and provides a constant output irregardless of the dynamic demands of power hungry equipment or your neighbors. When your power amp is asked to produce loud orchestral levels you want to make sure it has all the power it needs. Power Plants have such low output impedance that even the hungriest of amplifiers won’t be starved for clean AC power. The results of feeding your equipment with low output impedance are dramatic: unrestrained dynamics even under the loudest passages, an open wide soundstage that does not collapse with volume and a naturalness to the music that is remarkable.
e safe and buy from AudiogoN's number one rated seller by feedback. We have over 12,000 points of perfect feedback.
We accept PayPal, Visa, MasterCard and Discover as well as money orders. Call 770-667-5633 with questions or to place an order for this fine power regenerator.
Acoustic Zen, Audio Space tube electronics, Bob Carver tube amps, Burson Audio, Creek, Denon, DSPeaker, Emerald Physics, Epos, Furutech ADL, Gallo speakers, Gini Systems LS3/5A speakers, Graham Slee, Jolida, LSA amps and speakers, Marantz Reference, Micromega, Mordaunt Short Loudspeakers, Music Hall, Peachtree Audio, Project turntables, PS Audio, Pathos, PSB headphones, Rolls Bellari, Silverline Audio speakers, SONOS, Spatial Computer, Spread Spectrum Technologies Ampzilla, WADIA, Wireworld, Wyred 4 Sound, Wywires
Sales policies on the Underwood Hifi Inc. website at www.underwoodhifi.com