BrystonBIT-15usedBryston BIT-15 W/ Free Shunyata Diamondback AC cableAmazing and award winning Power Conditioner using a massive Toroidal Isolation Transformer! THIS IS THE MODEL THAT HAS THE SURGE PROTECTION. I’ve replaced the BIT 15 with a BIT 20 because of upgr...1300.00

Bryston BIT-15 W/ Free Shunyata Diamondback AC cable

Listing ID: LIS53667 Classified 
 Listed  · 1215 Views

3 Watchers

Items from this seller

Time Left: Listing Sold

This listing has ended.

Condition
9/10
Payment methods
Ships fromArvada, CO, 80002
Ships toUnited States
Package dimensions24.0" × 23.0" × 9.0" (48.0 lbs.)
Shipping carrierunspecified
Shipping costSpecified after purchase
Original accessoriesBox, Manual
AverageResearch Pricing

Amazing and award winning Power Conditioner using a massive Toroidal Isolation Transformer!  THIS IS THE MODEL THAT HAS THE SURGE PROTECTION.  I’ve replaced the BIT 15 with a BIT 20 because of upgrading to high power mono amps!  Comes complete with a Shunyata Diamond back AC Cable.

Noisy AC power delivery adversely affects every aspect of your hi-fi or home theater system. The products of ’dirty’ power include diminished resolution and dimensionality in audio playback along with lifeless colors and poor contrast in a video display.

Bryston’s 10 outlet BIT15 Isolation Transformer power conditioner is the solution to common AC power line problems. The BIT15 has been designed as a complete power isolation unit, which is ideal for protecting your equipment while smoothing out the current running through your home theater and home audio system.

Most power conditioners are simple filters and do not provide isolation between the outside power grid and the inside power source. The BIT15 provides true isolation, along with low source impedance, and large enough instantaneous current for today’s most sophisticated and powerful audio amplifiers. Protect your system against diminished resolution and dimensionality in audio playback and video display.

A massive toroidal isolation transformer provides complete isolation and ensures sufficient reserve power capabilities to source high current requirements for high power systems.

State-of-the-art Protection

The ever-present risk of severe power line spikes caused by everything from machinery and common household appliances to lightning storms is a constant threat to your system. Bryston provides state-of-art protection against power problems and series-mode surge without the use of failure-prone MOVs (metal oxide varistors).

Bryston power conditioners provide clean AC Power to enable you to obtain the performance your audio and video products are capable of. Plus, they protect your valuable equipment through the advanced series mode surge suppression.

Very Low Source Impedance and High Current

Bryston units present very low impedance to any connected device. A low impedance power source allows a power amp to instantaneously deliver high amounts of power. A typical 200 watt audio power amplifier demands 10 amps RMS current from a 120 volt line but may demand up to 50 amp instantaneous peaks. The standard residential wall receptacle can’t supply the 50 amp peaks.

Series Mode Surge Suppression

Bryston power conditioners use the finest, most elaborate surge suppression technology available. Series Mode Surge Suppression does not shunt the spike to ground like MOV’s do, and therefore the ground is infinitely more stable in a Bryston power device. Additionally, most MOV-based surge suppression units allow as much as 300 volts through to the protected components, easily enough to do substantial damage, whereas Bryston surge suppression has clamping voltage onset of ~2V above peak nominal voltage. Bryston units are built to withstand 6,000 volts and 3,000 amps surges, with up to 1000 repeats.

Total Isolation and Low Noise

Bryston power products provide isolation through their specially designed toroidal transformer, which creates a protected zone between the outside power grid and the connected devices. Such isolation creates a barrier to reject external noise sources such as motors, lights, and dimmers. Bryston power products provide noise filtering at a range from approximately 2,000 Hz to over 1 MHz. Other regular transformer based products do not start operating until nearly 10,000 Hz.

Bryston products utilize Plitron ’LONO’ (Low Noise) transformer design technology that eliminates audible noise in the power transformer, regardless of line conditions, DC offset, and over-voltage. Bryston products perform at the NC10 level measured on the standard NC (Noise Criteria), which makes them suitable for use in very quiet environments such as professional recording and broadcast studios, as well as the most demanding consumer audio-video installations and systems.

Cleaner Power

Bryston products utilize Plitron NBT (Narrow Bandwidth Technology) to attenuate differential and common-mode noise without external circuits or components, and starting at a lower frequency (typically 2 kHz). Hear it for yourself! The Bryston result is startling.

Features

•                Plugs into standard household receptacles (NEMA 5-15R)

•                Provides clean AC and surge protection

•                Performs as a low pass filter

•                Uses moving mode surge protection rather than MOV’s for better surge performances

•                Meets IEEE c62.41-1991 and is built to withstand 6000 Volts, 3000 Amps for 1000 repeats

•                Clamping voltage of 2 Volts above peak nominal voltage

Capabilities:

•                Provides protection for 120Vac mains at up to 15 Amps of current

•                10 medical grade duplex outlets

This unit is VERY Heavy.  Will ship only to the United States.  Buyer pays 3% paypal fees and UPS shipping (insured).

Questions for the seller
Is the face grey or black?
Its silver

Ask the seller a public question

You must log in to ask a question.

Return Policy

Return Window

Returns are not accepted on this item.